| Clear |
Product # | 1510 | 1520 |
Product Description |
A unique clear polypropylene film backing with a custom formulated latex P/S adhesive for decal transfer and pre-spacing.
Used where precise registration is required and designed to assist in the application of P/S decals that have been cut into letters and legends. |
Tape Thickness PSTC-33 (mils) |
4.6 | 4.8 |
Adhesion to Steel PSTC-101 (180°, oz./in.) |
9 Med | 19 High |
Tensile Strength PSTC-31 (lbs./in.) |
18 | 18 |
Elongation PSTC-31 (%) |
600% | 600% |
Typical Uses |
- Pre-spaced lettering 2"-12" high
- Decals or lettering <12" in one dimension
- Fine line striping
|
- Pre-spaced lettering <12" high
- Heavily weeded, thermal die cut decals
|
The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture,
inks used and application technique. Our suggestions and recommendations concerning the use and
application of our products are based on tests we believe are reliable. However, the purchaser must
test the suitability of our products for their intended use under their own operating conditions.
Protective Packaging assumes no liability for claims beyond the replacement value of any
defective products, and is in no way liable for consequential
or incidental damages. |