APPLICATION |
A truly year round, all-weather tape providing complete electrical and mechanical protection. For insulation, protection
and holding in high voltage electrical appliances. For splicing and terminating wires and cable. For color coding
and wire harnessing. |
FEATURES AND BENEFITS |
- A tough, flexible and resilient PVC film that won’t crack or harden even at -18 degrees C.
- Flame retardant for safe electrical insulation.
- Non-softening adhesive prevents pigtailing and lifting.
- Non-corrosive, excellent resistance to moisture, alkalies, acids and solvents.
- UV and abrasion resistant, excellent shelf life.
- Moisture tight seals in tropical heat or arctic cold.
|
TECHNICAL DATA |
Backing material | Polyvinyl chloride (PVC) film |
Adhesive | Rubber-based |
Total tape thickness | 7.5 mils |
Elongation | 230% |
Tensile strength | 22 lbs. per in./3.92 kg per cm |
Adhesion to steel | 23 oz. per in./249 gm per cm |
Adhesion to backing | 26 oz. per in./298 gm per cm |
Unwind | 37 oz. per in./396 gm per cm |
Dielectric strength | 9,500 volts |
Insulation resistance | 1 x 108 megohms |
Insulation class | 80°C |
UL 510 Standard | Flame retardant, cold and weather resistant |
Canadian Standards Association | C22.2 |
Gov’t specification | HH-I-595C |
Standard color | Black |
Available colors | Red, Blue, Yellow, Orange, Gray, Brown, Green, White |
Note: The above are typical values and should not be used in writing specifications.
The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture,
inks used and application technique. Our suggestions and recommendations concerning the use and
application of our products are based on tests we believe are reliable. However, the purchaser must
test the suitability of our products for their intended use under their own operating conditions.
Protective Packaging assumes no liability for claims beyond the replacement value of any
defective products, and is in no way liable for consequential
or incidental damages.
|